On this page, you will find the mount reference for each 3D elements.
The position are all from the .geom file !!
The 3D model should have the following parts: *Front wheel > fwheel.edf
- Rear wheel > rwheel.edf
- Upper fork (with grip, Tee) > steer.edf
- Lower fork (with caliper, front axis) > fsusp.edf
- Swingarm > rsusp.edf
- Chassis chassis.edf
Front/rear wheel[]
The front and rear wheel should have the 0 axis in the center of the wheel axis.
Swingarm[]
The swingarm is mounted on the point chassis_rsusp_min position from the chassis.
Its reference (0,0,0) should be the pivot point.
The wheel is then placed on the rwheel_min position
Lower fork (with caliper)[]
The position of the front wheel axis is fwheel.
X is pointed toward right of the motorcycle when on it
Y is pointed toward up
Z is pointed toward rear of the bike
Upper fork[]
I don't have enough info to place it correctly
It looks like the center of the Tee, is at the position front_upper
Chassis[]
The chassis should be positioned with the footpeg on footpeg_left (or right)
The point
X is pointed toward right of the motorcycle when on it
Y is pointed toward up
Z is pointed toward rear of the bike